Modular, configurable storage box

ℹPrice for standard configuration storage box: £140^,08
Please select your own options (configure module) based on your needs. The total price will update accordingly.

drawers-stacked-2x100-2x80-drawers-open-rear-right-bottom.jpg

drawers-stacked-2x100-2x80-drawers-open-side-view-left.jpg

drawers-stacked-2x100-2x80-drawers-open-side-view-right.jpg

Configure module

ℹ Box Length (BL): ℹ Box Height (BH): ℹ Box Width (BW): ℹ Module option (ModOpt): ℹ Lid (LID):

SEK
1 800.00 CHF
154.64 DKK
1 250.00 €
166.82 £
140.08 NOK
1 764.71 $
187.30 No
items

How to configure your modules

Box length (BL)

The box length represent the total length/depth of the storage module. If you will be using the storage box in a vehicle, please keep in mind the available space in the trunk. For vehicles with a second or third seat row, it is important to measure the available length, with the last seat row up, at the same height as the height of the module because most seats lean somewhat towards the back. The total inside length of a drawer is approximately 6cm shorter than the length of the box.

ℹWhen stacking the storage boxes vertically, if the last seats of the last row leans backwards, you can go for longer/deeper boxes at the bottom and shorter ones at the top.

Box height (BH)

The box height is the actual total height of the box, measured vertically at its outside. The inside height is usually the outside box height (BH) minus 4,1cm (36mm material thickness + 5mm bracket and screw head).
If you go for the drawer module option, the max. inside height of the drawer is the box height minus approximately 5,5cm (55mm)

Box width (BW)

This is the width of the box, measured horizontally at its outside. The inside width is usually the box width minus 3,4cm (24mm is the total thickness of the material + the thickness of the brackets + thickness of screw head).
If you go for the drawer module option, the max. inside width of the drawer is the box width minus approximately 9,5cm (95mm) which represents the thickness of the heavy duty drawer rails and the material of the box + the material of the drawer.

Module options (ModOpt)

The module option costs are being dynamically calculated based on several factors such as the length, width and height of the box in which the options are placed.

ℹThe cost for a drawer is being calculated as a percentage of the material needed to build the box. A drawer requires almost as much, even more for some drawer models, material as the box itself. Then there are the heavy duty rails we use, for which the cost changes based on the box length, and the labour hours required to build it.

ℹThe cost for the horizontal dividers are being influenced by the box length and width only, the cost of the vertical dividers are being influenced by the box length and height only while the cost of the front door/lid is only being influenced by the box width and height.

The front door/lid is the most simple option for a box/module. Basically, with this option, the box offers an open storage space with a front door.

Top lid (LID)

A lid that is incorporated in the top of the box allowing the user to reach in for the goods inside the storage box, even if it is equipped with a drawer.

If you are looking for custom designed storage units, please get in touch